FreeGo2
Push2
The FreePush2 (FreeP2) is ideal for the visual observer to quickly and easily find difficult objects without too many settings. Even someone who has no knowledge of the starry sky can find the object very quickly!
Many telescopes work with incremental position sensors.
In addition, you must always indicate where you are, say a ruler with no numbers on it.
Our solution is the strength of our 14-bit absolute magnetic coding chip that requires no mechanical connection to the two axes and immediately indicates the correct position. So, a kind of ruler with numbers on it.
The FreeP2 can be mounted quickly and easily and works on both the PC (USB) and the smartphone (Bluetooth). The resolution is approximately 16,384 points or approximately 1.4 minutes of arc. This is more than good for manual operation. And she is especially affordable.
If the telescope has a fixed location or can be quickly fixed at a fixed point, you then "never" have to calibrate after the first calibration. So, connect and work directly with the telescope. In the event of a small malfunction (battery empty, etc.), just switch it on again and continue working immediately without calibration.
Dimensions: 47.6 x 35.6
Holes size: 3.2 mm
Holes location: 3.0 x 3.1
FreeGo2
Lite
The Lite FreeGo2 module is designed for controlling Standard telescope mounts.
There are many connections available which most have to be connected.
Input-Output to a computer device has to be achieved with standard mini USB cable .
There is a IO section available witch can be used to controlling addional hardware, like Dome control
, lights, etc.
Dimensions: 85.4 x 46.8
Holes size: 3.2 mm
Holes location: 2.9 x 2.9
FreeGo2
Big
The FreeGo2 module is designed for controlling heavier telescope mounts.
There are many connections available witch most have to be connected.
Designed to control 4 motors, for instance: RA , DEC, Dome rotation, Dome shutter.
IO to a computer device hst to be achieved with standard mini USB cable.
There is a IO section available witch can be used to steer addional hardware, like Dome control, lights, etc.
The Big module coming with a small Aluminium case, installing in the case will cool down the power Fets on heavy electrical current.
Dimensions: 111 x 61.0 mm.
Holes size: 3.2 mm
Holes location: 3.2 x 3.2
© 2022 FreeGo2